If you see an No EEPROM bin file found error, you may need to run
sudo -E rpi-eeprom-config edit and add
[all] BOOT ORDER=0xf14.
Repeat the steps above (without
sudo rpi-update) with the new OS on the SSD. SSH ing into the new OS on the SSD may require clearing out the line with the corresponding IP in your
~/.ssh/known hosts file with
ssh-keygen -R .
Hardware Setup
Remove the hard drive bay dividers and front panel extension cable from the inside of the chassis.
Install the Raspberry Pi s into their cases.
Install the M.2 drives into their enclosures.
Source: Andrew Myrick / Android Central
The Raspberry Pi s convenience, versatility, and usefulness simply cannot be understated. With just a few clicks, you can set up just about everything, including the ability to set up Plex on a Raspberry Pi. After you ve finished loading up your library of movies, TV shows, and even music, you can then download the Plex app on any of your devices and enjoy your favorite content from anywhere. Today, we re going to show you how you can get everything set up.
Products used in this guide
Stream all the things: CanaKit Raspberry Pi 4 8GB Starter Kit