இன்க் ஃபெப் News Today : Breaking News, Live Updates & Top Stories | Vimarsana
Stay updated with breaking news from இன்க் ஃபெப். Get real-time updates on events, politics, business, and more. Visit us for reliable news and exclusive interviews.
Top News In இன்க் ஃபெப் Today - Breaking & Trending Today
MKS Instruments Announces Ophir® PD300RM-UVA, Irradiance and Dosage Sensor MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® PD300RM-UVA Irradiance and Dosage Sensor. Image Credit: MKS Instruments Calibrated over the UVA and violet spectral range (350-450 nm), the sensor provides a flat spectral response that is forgiving of inexact wavelengths, wide bandwidths, and wavelength shifts (e.g. due to heating). This allows for measuring both narrowband (lasers) and broadband sources, such as LEDs, without the need to know the exact wavelength. The sensor also supports measuring sources at different wavelengths simultaneously. It is designed to analyze light sources, including for UV curing and drying of polymers, paints, and other UV responsive materials that are used in industrial applications, such as semiconductor processing and additive manufacturing. � ....
Written by Conor Corrigan, Applied Extracts For a myriad of reasons, simple in-house analytical testing for medical and recreational marijuana labs should be required but is not. In an industry where analytical results are everything, surprisingly few production labs perform testing themselves, and it is a serious problem (unsurprisingly). Image Credit: Shutterstock/Tinnakorn Jorruang Aside from the obvious health-related risks of not testing products that are ingested in food/medicinal products, there are also risks to business bottom-lines. In-house deficiencies in testing lead directly to losses in revenue & COGS and can be costly and/or catastrophic to the business. For readers not familiar with this cannabis & hemp processing niche, imagine the controls that are in place & the transparency-in-results that your typical packaged foods producer enjoys. Extensive testing is performed at all stages of food production: intake of raw materials, extraction e ....
Saelig Introduces New Torque Sensors With Non-Contact Technology Saelig Company, Inc. has introduced the Sensor Technology TorqSense SGR510/520 Torque Sensors which use a four-element strain gauge bridge design with non-contact surface acoustic wave (SAW) detection. These sensors offer a 250% over-range reading capacity, allowing sudden spikes in torque to be measured and recorded accurately without clipping. The new design compensates for extraneous, inadvertent forces such as bending moments, improves sensitivity over previous models, and offers a wider operating temperature tolerance. Related Stories Image Credit: Saelig Company, Inc. The measurement range of the SGR series is 1Nm to 500Nm (up to 13000Nm available soon), accurate to +/-0.1% and with a resolution to +/-0.01% of the transducer s full scale. With a sample rate of 4000 samples per second, the digital transmission between rotor and stator eliminates all cyclic fluctuation of the signal due to shaft r ....
JEOL Introduces New Configuration of Its Broad Ion Beam Milling Cross Section JEOL USA introduces a new configuration of its bestselling broad ion beam milling instrument, the Cross-section Polisher (CP). The CP is widely used for preparing pristine samples prior to high-resolution imaging and elemental analysis with the Scanning Electron Microscope (SEM). The upgraded configuration includes high-speed milling, sputter coating, cryo-preparation (down to LN2 temperature), and air-isolated transfer for atmosphere-sensitive specimens (for example Li batteries). Traditional mechanical preparation of specimen surfaces for SEM imaging can introduce various artifacts, such as scratches and embedded polishing media, that obscure the original microstructure, crystallographic information, and precise layer thickness measurements. Broad ion beam polishing using the JEOL cross-section polisher (CP) offers pristine surface preparation with minimal artifacts. The JEOL CP is a tabletop i ....
JEOL Introduces New Time-of-Flight Mass Spectrometer JMS-T2000GC AccuTOF™ GC-Alpha JEOL builds upon its legacy of successful AccuTOFTM GC series gas chromatograph – time-of-flight mass spectrometers with the release of the JMS-T2000GC AccuTOF™ GC-Alpha . This product is a GC-MS that represents a significant improvement in performance and functionality using two newly developed key technologies. The basic hardware performance has been greatly improved and a new generation of automated data analysis software is included in the standard configuration. High-Performance Hardware The JMS-T2000GC “AccuTOF™ GC-Alpha”, the 6th generation of the successful AccuTOF™ GC series, features new high-performance hardware that achieves three times the mass resolving power and mass measurement accuracy of the previous “AccuTOF™ GCx-plus” by using a whole new ion optics design that achieves excellent sensitivity and high data acquisition speed, the long-time hallmark ....