Kill Valve News Today : Breaking News, Live Updates & Top Stories | Vimarsana
Stay updated with breaking news from Kill valve. Get real-time updates on events, politics, business, and more. Visit us for reliable news and exclusive interviews.
Top News In Kill Valve Today - Breaking & Trending Today
As we close the kill valve. exactly how successful they have been in closing the leak and moving forward with the test itself. it as i started earlier yesterday, one of the reasons we took the pause was to put a set of testing procedures in effect to allow us to test aexcuse stick and sonar and visual inspection of the bottom throughout the test. the test is scheduled to run in 48 hours in six hour increments with the ability to terminate the test at any time if we have reason to believe we need to do it. the only reason to terminate the test is if we have a very low pressure reading, indicative that the oil was being released from the wellbore out into the formation but as the pressure continues to rise, we will continue to monitor it and evaluate where we are at based on the information that s available. at the end of 48 hours, we will terminate the test, go back to production with the q4000 and ....
And start to slowly close the choke line and take the pressure readings at that time, as we intended to do. just to let you know what happened, this is the choke line. off of the capping stack. as you know, this comes out of the assembly and goes up. if you ve seen the video, this is that big yellow device with the curve pipe that goes up with the oil coming out of it. it connects back to the capping stack down here and there is an ass assembly where this meets together. the entire choke assembly was removed and replaced overnight. they are checking this right now to make sure it is ready to go and we will go into the process that i just talked about earlier. and we will know, we will apply pressure to this as we close the kill valve. exactly how successful they have been in closing this leak and moving forward with the test itself. as i stated earlier yesterday, ....
Knew that this part of the pipe right there would become oil and gas-free moving out of the way there. but hard to see. oil is no longer coming out. now, there is oil, wolf, coming out from a couple of places, from what is called a choke line and kill line. this is exactly what we expected. they will not close the other valves for a while. that is the first valve they are going to close. they will check what the pressure is going to do. then they will slowly close the kill valve. then finally, maybe 48 hours from now, turn them all off and make sure that all of the valves are completely off and check the pressures there. this is a long process. tv people don t like long processes, and they want instant gratification, and we are already to that point, because we know that at least the first part is started. when the last thing is done, maybe this thing is dead. so when thad allen says every six hours they will assess the pressure and within a maximum of ....
Close the choke line and take the pressure readings at that time as we intended to do. just to let you know what happened, this is the choke line off of the capping stack. as you know this, comes out of the assembly and goes up. if you ve seen the video, this is that big yellow device with the curved pipe that goes up with the oil coming out of it. it connects back to the capping stack down here at a flange, and there s an assembly where this meets together. this is where the leakage was discovered. the entire choke assembly was removed and replaced overnight. they are checking this right now to make sure it is ready to go and we will go into the process that i just talked about earlier, and we will know when we apply pressure to this and as we close the kill valve exactly how successful they ve been in closing this leak and moving forward with the test itself. as i stated earlier, yesterday, one of the reasons we took the pause ....