Ultra-Thin Silicone Rubber with Adhesive Backing as Gaskets and Seals Supplied from Stockwell Elastomerics, Inc.
Share Article
For rugged displays, touchscreens and similar sealing requirements where very thin gaskets are needed to achieve IP ratings, Stockwell Elastomerics now offers .010 inch and .020 inch thick silicone rubber gaskets with pressure sensitive acrylic adhesive.
Clear Ultra-Thin Silicone Gaskets with 3M Adhesive
“The ultra-thin HT-6000 series silicone products with 3M9667MP high performance acrylic adhesive can solve sealing challenges for designers of rugged handheld and portable devices with displays and touchscreens” said Stockwell Elastomerics’ Chief Technical Officer Bill Stockwell.
PHILADELPHIA (PRWEB)
June 02, 2021
Stockwell Elastomerics announces the availability of gaskets fabricated from .010 inch and .020 inch thick Rogers BISCO® HT-6000 series silicone rubber with .002 inch thick 3M™ Adhesive Transfer Tape 9667MP acrylic adhesive laminated to one side. Designers seeking a very thin, resilient gasket with an adhesive backing benefit from these low durometer silicones cast to a tight thickness tolerance. Until now, these thin gauge silicone materials have not been available from the manufacturer with an adhesive backing. Ultra-thin silicone gaskets can now be provided with .002 inch thick 200MP series 3M9667MP acrylic adhesive with a 78# moisture proof release liner for ease of liner removal and handling during assembly. Stockwell Elastomerics developed this capability and selected 3M9667MP for its performance properties and high bond strength on most substrates found in ruggedized portable equipment.