Hi all people who own Chinese made semi-universal dividing head BS-0, BS-1, universal dividing head BS-2.
When I used the dividing head, I discovered that there were hard points in the bearing, the crank did not feel the same all the way. Then I noticed that the workpiece that was milled was not in the center since I use an adapter with ER-32 collet attached in dividing head.
So I measured with the dial on the cone inside the dividing head and discovered that it was a throw. Tried to adjust the thrust bearing without it helping, still slack in the spindle.
Users of Criteria Hub, the criteria-based sourcing solution from Mortgage Brain, will now be able to include Central Trust in their searches.
Mortgage brokers using Criteria Hub are able to search across thousands of different criteria employed by different mortgage lenders to identify which are most suitable for their clients.
Criteria Hub’s system data is managed and verified by lenders.
Central Trust is a secured loan specialist and has been lending for more than 30 years providing solutions for many different customer scenarios.
It currently provides loans of between £10,000 and £250,000 across terms ranging from three to 25 years, and up to a maximum loan-to-value (LTV) of 75%.
Bygone Trader Catalogues | Model Engineer model-engineer.co.uk - get the latest breaking news, showbiz & celebrity photos, sport news & rumours, viral videos and top stories from model-engineer.co.uk Daily Mail and Mail on Sunday newspapers.
More than eight out of 10 brokers use the affordability calculators of up to six lenders when sourcing a single case, according to Mortgage Brain.
Attendees of Mortgage Brain’s Virtual Mortgage Vision Masterclasses in March were polled on their habits when sourcing deals for clients.
The survey found that 84.5% visited the affordability calculators of between one and six lenders on each case, while 58% rarely used an affordability calculator from a non-top 10 lender.
The study identified other occasions when brokers spend large amounts of time on manual tasks, with 81.5% spending more than 15 minutes keying in the details for a decision in principle (DIP) or full mortgage application.
Hi all, my new Sieg SX2.7 from Arceurotrade arrived this morning, spent a couple of hours unboxing, taking the column off, moving it down the mancave and putting it back together, all went well.
Had a good look over it and have to say I m very happy so far, checked the table X axis, maybe 0.005 mm end to end, less for the Y axis, (dti is only 0.01mm) all with no play as far as I could tell, table looks very good, everything moves nice and easy with only the last 10mm of X axis tight at the left end of travel.